Mr2

All kits are hand made construction using 2 ply FIBERGLASS reinforced 100% top grade American silicone.

Pictures	Item	Color	Price	Buy
	Clamps for Stages 1- 4 only- Stainless Steel Spring Loaded T-bolt, Constant Torque & Liner Clamp Kits - Protect your new hose kit with our fully lined MR2 Clamp kits. Extreme Heavy Duty. Pictured are polished CT clamps (above), polished Spring Loaded T-bolts (center) & polished CT & Spring Loaded T-bolts clamps (bottom). Our T-Bolt option utilizes two Spring Loaded T-bolts which are to be used on the turbo compressor housing only. The remaining clamps are standard T-bolt series. Clamps do not come polished.		23.06/58.58/65.06
	Stage 1- 3 Piece MR2 Turbo Standard Hoses. Includes replacement for Throttle Body, Turbo & Intercooler outlet. Clamps not included.		33.00
	Stage 2- 4 Piece MR2 Turbo Standard Hoses - Includes Long Hose to Intercooler, throttle body, intercooler outlet and turbo outlet hose. *Intercooler pipe mounting bracket must be removed for proper fitament.* Clamps not included.		59.00
	Stage 3- 3 Piece MR2 Turbo Hump Hoses Kit. Includes replacement for Throttle Body, Turbo & Intercooler outlet. Clamps not included. Pic. is a 4 piece.		75.00
	Stage 4- 4 Piece MR2 Turbo Hump Hoses. Includes Long Hose to Intercooler, throttle body, intercooler outlet and turbo outlet hose. Intercooler pipe mounting bracket must be removed for proper fitament. Clamps not included.		98.00
	Stage 5- Replaces 10" Long OEM Rubber hose. Polished Mandrel bent 304 Stainless Steel. Low maintenance to keep that mirror polished finish. Larger inside diameter allows for more air flow to intercooler. Kit includes: Pre-formed Hardpipe, Stainless Steel Liner Clamps & transition hoses.		135.00
	Stage 6- One of the largest air restrictions is the OEM pipe to the Throttle Body. Replacing this piece will allow for smoother throttle response, less back pressure, higher HP gains when turning up the boost and an overall better running car. This is a must have upgrade for the daily driven car to race track duty!!! Polished Mandrel bent Intercooler pipe from Intercooler to Throttle Body. Larger inside diameter allows for more airflow to Throttle Body. Kit includes: Polished Mandrel bent pipe, silicone connectors & Stainless steel liner clamps. 1 WEEK DELIVERY FROM DATE OF ORDER.		115.00
	Stage 7- Polished Intercooler pipe out of the turbo. Increases air volume and flow to the intercooler for overall better performance. Much larger diameter than OEM. Can use stock BOV or adaptor for aftermarket blow off valves. *Will work with Greddy Intercooler kit etc., with the correct silicone transition hose. Will not work with stock OEM hose to "intercooler" unless custom size is made.* *Kit includes: Silicone transition to turbo, Stainless Steel liner clamps, polished hard pipe.*		230.00- B/O Next Production Jan. 31, 2004.
GenIII Intake	Stage 8- THE BOMB- Custom Polished Intake. Fits U.S. & Gen. III engine. Works with Apexi Power Flow Intake Filter. Smoothes out airflow to turbo using 45 Degree geometry instead of the OEM 90 degree and looks great!!! *Does not include* *filter.* *Kit includes: Silicone hose to turbo, silicone hose to MAF, Stainless Steel liner clamps and High Temperature Caps on all fittings just incase you decide not to use them.* Sizing: 3" x 3" BOMB INTAKE 3" x 4" x 3" BIG BOMB INTAKE 4" x 3" MINYA INTAKE 4" x 4" GODZILLA INTAKE *These are all hand made and two weeks delivery from date of order.*		225.00/ 350.00
	Stage 9- Spearco Intercooler Upgrade Our spec. Intercooler flows enough CFM to support 500+hp. 3" inlet/outlet. Included is a welded aluminum fan shroud. Kit includes: Polished piping from Turbo to Throttle Body, silicone hoses, stainless steel liner clamps, fan shroud, intercooler mounting plate, intercooler and Spal pull fan. We also custom make a 3"piping. Please email us for information. 3-4 weeks delivery from date of purchase.		1390.00
	Greddy Silicone Hose Upgrade- Replace your worn Greddy hoses or just change the colors to match your car/engine bay. Kit includes: all intercooler connectors beginning at the turbo, transition hose and custom sleeved throttle body connector. Email us if for replacement clamps.		121.00
	Greddy Intercooler Piping Upgrade Fits w/TRD Strut Brace. Our kit is a direct bolt on kit to replace the complicated Greddy Intercooler piping. The IC inlet pipe is 3" shorter than the Greddy, eliminates 2 of the 90 degree bends, two clamps and one less silicone hose. The angles are much smoother and direct than the Greddy kit. The throttle body pipe starts off by using one less silicone connector, 2 less clamps and a smoother angle to the throttle body. Also, our pipe sits 1" lower at the point where the Greddy pipe meets the Strut bar allowing for more clearance and eliminating any rubbing issues. Kit includes: All silicone connectors, stainless steel liner clamps, polished 2 1/2" piping (slightly larger than the Greddy kit) beginning after the BOV pipe. Stage 7 (BOV pipe) fits perfectly with this upgrade. We also have a clamp (t-bolt or constant torque clamp) and Hump Hose upgrade. Email us if for upgrade in clamps and hoses.		350.00